Filter By:
- Electronics (156)
- Fenders (61)
- Hydration (177)
- Lighting (180)
- Bike Locks (123)
- Nutrition (48)
- Packs/Racks/Baskets (233)
- Pumps (147)
- Show More Categories
- Safety (46)
- Tools/Maintenance (593)
- Trailers/Strollers (33)
- Indoor Cycling (37)
- Other (63)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Accessories

$63.92
Jumpstart your day with Nuun Energy, a crafted blend designed to deliver a lift that lasts. 8 tubes per pack. That's 80 servings total!
- 20 mg Panax Ginseng, an Ancient Herbal Remedy
- 80 mg of Caffeine Derived From Organic Green Tea
- A Blend of Vitamins B12 & B6
Need a Boost?
Energizing ingredients for any adventure. One up your water™ with our high-voltage blend of organic green tea, ginseng, B vitamins, and electrolytes for a quick energy boost. It’s the perfect sidekick for workouts, workdays, and everything in between.
How To Enjoy:
- DROP: Add one tablet to 16 oz of water
- DISSOLVE: Wait a few minutes for tablet to dissolve
- DRINK: Sip, savor, and enjoy!

$20.00
Designed with efficient carbohydrates and optimized electrolytes to keep you moving.
- Optimized Electrolytes Maintain Fluid Balance
- Efficient Carbs Speed Up Hydration
- Flavors Sourced From Organic Ingredients
Breaking a Sweat For More Than 90 Minutes?
Drink Nuun Endurance! When you work out longer than 90 minutes your body needs more than water and electrolytes to keep up. Nuun Endurance is the perfect blend of electrolytes and carbohydrates to keep you hydrated and go longer and stronger all dang day.
How To Enjoy:
- DROP: Add one scoop to 16 oz of water
- STIR: Stir or shake to dissolve
- DRINK: Sip to stay hydrated during long workouts

$25.00
Breaking a sweat? Grab some Nuun Sport! When you sweat, your body loses vital minerals and electrolytes that need to be replaced for healthy recovery and lasting performance. Nuun Sport provides a great balance of ingredients for mineral replenishment and optimal hydration before/during/after your workout.
- 10 tablets per tube, 4 tubes per pack. Dissolve in 16oz. of water.
- These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.
- The Conservation Alliance flavors: Lemon Lime, Fruit Punch, Tri-Berry, and Strawberry Lemonade
- People for Bikes flavors: Wild Berry + Caffeine, Fresh Lime + Caffeine, Watermelon, Citrus Fruit

$41.00
Optimized for both side and direct bottle entry, Zipp's Alumina cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle.
- 27 grams

$23.00
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.

$36.00
Zipp's Speed Box 1.0 is designed to mount securely to a bike's top tube to hold nutrition and small items conveniently within reach. Featuring solid-molded EVA construction, water-resistant zippers, and 3-point Velcro attachments, the Speed Box 1.0 is a lightweight, easy-to-use alternative to traditional saddle bags.

$36.00
Zipp's Speed Box 3.0 is designed to mount securely to a bike's top tube to hold nutrition and small items conveniently within reach. Featuring solid-molded EVA construction, water-resistant zippers, and 3-point Velcro attachment, the Speed Box 3.0 is a lightweight, easy-to-use alternative to traditional saddle bags.

$88.00
Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.

$46.95
Low-cost nylon composite mount with NEW Italian-made cage. Featuring 60% more grip force than original model!
- Single bottle system neatly tucks one bottle behind your saddle for easy access to hydration
- Perfect location for an extra bottle when taking on longer training rides or Century rides
- Mounts low to not hinder your ability to get on and off the bike
- Carry repair kit with XLAB Multi-Strike Repair Holder
Ideal for first-time rear hydration system buyers
- Ergonomically designed so you can easily access the bottle even with limited flexibility
- Low mounting position provides enough clearance to easily swing your leg over the saddle
- Adjust bottle height by up to 1" to perfectly position to your comfort level
Worry-free bottle security
- High-gripping XENON cages tout approx 8lbs (3.6 kg) cage grip force – within the ideal range of rear system grip force for worry-free bottle retention
- Strong, sturdy mount prevents swaying, rattling and vibration
Easy storage upgrades readily available
- Add an XLAB Multi-Strike Repair Holder – a compact storage bracket that sleekly mounts behind the cage!
- Multi-Strike Repair Holder easily carries a clincher repair kit – tube, tire levers, XLAB Air Strike CO2 Cartridges and XLAB inflator. It can also carry a full tubular setup including tubular tire and inflating foam sealant.

$99.95
The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.

$26.95
Convenient, state-of-the-art storage case with a stealth carbon-look finish fits securely in cages. Rattle-proof padding for a noiseless ride. Ideal for road-side repair tools.
- Capacity: 25.8 cubic inches (423 cubic cm)
- Height: 5.25 in (133.5 mm)
- Weight: 65g

$64.95
XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.

$69.95
XLAB's Gorilla XT Carbon Cage is perfect for mountain bikes, rear-mounted carriers and other high-stress hydration situations. The XT has over 4 times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit. It boasts an amazing 14-pound grip force on bottles.

$25.95
Xlab's Mezzo Bag is the perfect seat bag for carrying and protecting your spare tubular tire (or 2 tubes), your inflator, and other essential repair items. The bag features a large main compartment and a zip pocket on the outside for easy access. It's made from tough woven nylon. It's easy to install with the hook-and-loop and buckled straps, and it works with both standard and aero seatposts.

$10.95
XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

$9.95
XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

$5.95
Colored talons for the Raptor Cage. Now you can finally match your cage to your bike at a low cost!

$102.95
Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

$64.95
XLAB's Torpedo Carbon Cage is designed specifically for their horizontal aero bar hydration mounts. Use with a standard bottle or XLAB's new Torpedo model (mounts and cages sold separately). The cage is made of ultra-light carbon, holds bottles securely and is super easy to use. It features a 5-pound grip force on bottles so they stay put over even the roughest roads.

$52.95
Keep your hydration right between your arms and your computer at a glance. Easy-to-install system stacks hydration and ride data into one simple design.
- Upgraded computer mount takes on rougher road conditions. 3X stiffer than original Kompact 100.
- Just add your choice of beverage: Includes calibrated, squeeze-and-squirt Aqua-Shot Racing Bottle
- SecureClip Brackets Install in an Instant: No ugly cable-ties, rubberbands or electrical tape needed to secure system: SecureClip brackets simply 'clip on' and Velcro down to aerobars
- On top Garmin and Wahoo computer mount gives quick-glance bird's-eye-view of your cycling data
- High-grip design holds bottles tight – yet bottle insertion and removal is easy
All Inclusive System
- Comes with everything you need – mounting plate, Garmin and Wahoo computer mount for Garmin bike computers or multisport watches, cage and bottle
No-Fuss Installation, Comes Fully Assembled
- No Zip-ties, rubber bands or need to concoct your own mounting solution required – simply clip-on and Velcro-down
- Clean, 'snap' on XLAB SecureClip brackets eliminate rattling and shifting
- Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart
Data Right Where You Need It
- Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface, and Wahoo bike computers
Rear Offset Design
- While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions
- Reversible design easily allows for repositioning if you'd rather pull the bottle towards you than away.
- Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars
- Improves bike handling compared to systems that load weight onto aerobars
Easy Glide Cage Design
- Specially designed side cutouts enable fast bottle withdraw and entry. Available in black or red
Drink Fast with Self-Sealing Nozzle
- No need to open bottle nozzle with your teeth. Simply stop squeezing and the nozzle seals itself.
- Compatibility: Wahoo and GARMIN-specific
- Capacity: Includes 25oz (740ml) clear AQUA-SHOT bottle
- Adjustment Range: 70mm-150mm (center-to-center)
- Weight: 177g (without bottle or computer)
- Length: 145mm/5.7 inches
- Bottle Grip Force: 4lbs
Construction
- Bottle: Clear, lead free, BPA-Free and HDPE food safe certified bottle
- Mounting Plate: Aluminum Alloy
- Cage: Nylon Composite VULCAN CAGE
- Brackets: Nylon Composite with Velcro Straps coated with non-slip extension grip
Warranty:
- 2 Year Limited Warranty

$87.95
High-performance simplicity. New carbon design leverages the groundbreaking, award-winning design of the Torpedo Kompact 100 for an even lighter weight, sleeker and more rough-road durable hydration system.
- NEW unidirectional high-modulus carbon mounting plate
- Includes NEW high-grip carbon Raptor Cage, color-customizable to suit your setup
- Just add your choice of beverage: Includes hyper-reflective Cool Shot bottle to keep liquids super cool
- SecureClip Brackets Install in an Instant: No ugly cable-ties, rubber bands or electrical tape needed to secure system: SecureClip brackets simply clip on and Velcro down to aerobars
- On top Garmin computer mount gives quick-glance bird's-eye-view of your cycling data
All Inclusive System
- Comes with everything you need – mounting plate, Garmin-specific computer mount, cage and bottle
No-Fuss Installation
- Torpedo Kompact 500 comes fully assembled
- No Zip-ties, rubberbands or need to concoct your own mounting solution required – simply click-on and Velcro-down
- XLAB SecureClip brackets eliminate rattling and shifting. Fits 22.2mm diameter aerobar extensions. \
- Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart
Data Right Where You Need It
- Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface (check Compatibility tab for specifics)
Rear Offset Design
- While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions
- Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars
- Improves bike handling compared to systems that load weight onto aerobars
Kit-Match with a Color Customizable Cage:
- Color match your bike kit!
Insulated Bottle
- Hyper-reflective Cool Shot insulated bottle keeps liquids super cool
Highest Bottle Grip of Kompact Series
- 6 lb grip force is durable for rough road conditions: Carbon anti-launch design increases grip force
- Capacity: Includes 20oz (600ml) XLAB COOL SHOT insulated bottle
- Adjustment Range: 70mm-150mm (center-to-center)
- Weight: 154.4g (without bottle or computer)
- Length: 145mm
- Bottle Grip Force: 7lbs
Construction
- Bottle: Lead free, BPA-Free and HDPE food safe certified bottle
- Mounting Plate: Carbon
- Cage: Carbon chassis, polycarbonate RAPTOR TALON cage ends
- Brackets: Nylon Composite with Velcro Straps coated with no-slip extension grip

$154.95
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in—but doesn’t let water out.
- Capacity: 26oz (768 mL)
- Construction (Versa Mounting Plate): 16-layer unidirectional carbon fiber
- Construction (Cage): Carbon Torpedo Cage
- Construction (Computer Mount): Nylon Composite
- Construction (Bottle): Lead free, BPA-Free and HDPE food-safe certified bottle
- Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip
- Adjustment Width: 75-150mm
- Weight: 8.4oz (240g)

$36.95
Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts.
- Adjustment Width: 75-150mm
- Construction (Plate): 6061-T6 Aluminum
- Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip
- Weight: 1.9oz (55g)

$69.95
Carbon BTA hydration mount compatible with Torpedo Versa (sold separately). 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts.
- Adjustment Width: 75-150mm
- Construction (Plate): 16-layer unidirectional carbon fiber
- Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip
- Weight: 1.9oz (55g)

$79.95
XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

$14.95
High-performance cage at a low price point! Large area bottom hook supports large bottles with Side cutouts to enable fast bottle withdraw and entry.
High-performance cage at a low price point!
- Large area bottom hook supports large bottles
- Extra sturdy high resistance techno polymer design
- Made in Italy with the finest Italian quality
- Pair with the hyper-reflective Cool Shot insulated bottle (sold separately)
Grip Force
- Approx 4lbs grip force
Ideal Uses
- Road
- Triathlon (Aerobar and Frame)

$69.95
8-Bit System is a multi-function tool that regroups all potential needs in the field
-01 and -02 : 8-Bit Multi-tool plier offer 17 functions:
- Master link plier
- Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits
- Includes a tool for clearing tubeless valve stems and a spoke wrench
- Storage for one set of quick links
-03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on
- Chain breaker
- L key has a 3mm hex forked tire plug insert
- Utility knife
- Attach to 8-bit plier with magnets and short pins
- Items for internal storage are sold separately
-04 : 8-Bit Tire Lever + Rim Dent Remover add-on
- Tire lever
- Aluminum rim dent remover is designed for use with alloy rims
- Attach to 8-bit plier with magnets and short pins
-05 : Complete Kit Including Plier and both add-on

$139.95
8-Bit System is a multi-fonction tools that regroup all potential needs in the field
-01 and -02 : 8-Bit Multi-tool plier offer 17 functions:
- Master link plier
- Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits
- Includes a tool for clearing tubeless valve stems and a spoke wrench
- Storage for one set of quick links
-03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on
- Chain breaker
- L key has a 3mm hex forked tire plug insert
- Utility knife
- Attach to 8-bit plier with magnets and short pins
- Items for internal storage are sold separately
-04 : 8-Bit Tire Lever + Rim Dent Remover add-on
- Tire lever
- Aluminum rim dent remover is designed for use with alloy rims
- Attach to 8-bit plier with magnets and short pins
-05 : Complete Kit Including Plier and both add-on

$69.95
The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead.
- 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut
- Magnets keep all bits in place
- Ball detent swivel head helps access hard-to-reach places
- Handle doubles as breaker bar for extra torque when head is bent
- 8mm hex bit tested to over 40 Nm torque
- Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains)
- Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)
Page 1 of 64
Next page